Queen Light LHA-101-3 Long Arm Heat Sealer

  Intended use for joining various sheets, tents,
  agricultural materials, making semi-running
  flexible containers etc.

• Equipped with 3 KW heater.
  
• Nozzle width available 20/30/40mm.
  
• Throat depth 1000mm
  
• Upper and lower both rollers are driven and available to be driven with differential ratio.
  
• Nozzle moving direction can be changed for rightward to leftward or front to rear.
  
• Various applications are available for intended-use.

• Equipped 3KW nozzle heater with special designed upper roller to be fitting with extruded wire-cover.
  
• And also provides large-size lower roller and cylinder arm for easy work.
  
• It can be operated with one person for making ventilation duct from small to big size.
  
• Sealing speed should be about from 2m/min. to 10m/min.
  (Depends on material)
  
  
  

• Special designed "Z" shaped arm machine.
  
• Available for various sheet joining and hemming, particularly for sheet joining.
  
• Special arm design provides that any width material can be joining with easy work.
  
• From thin to thick materials can be joining with very easy work.
  
• Nozzle opening is 40mm, sealing roller width is 45mm.
  
• Upper and lower both rollers are driven, differential drive speed setting for both rollers are available.

• Machine for making large size duct, it has 2000mm length throat depth.
  
• Special roller behavior is provided.
  
• The direction of upper and lower roller is variable to be fitting for spiral wire specification.
  
• All rollers are driven individually.
  
• Recommendable for making mine air tube, air duct for machine exhaust, etc.